Hot
New
In stock
Pre-order
Out stock

Wotofo nexMESH A1 10pk for Profile 1.5 RDA

SKU: 6937291310645

VENDOR: Tasty Haze

$ 9.99

Hurry! Only 4 Left in Stock!

Real time 11 visitor right now

Pickup available at Rainbow City

Usually ready in 24 hours

Wotofo nexMESH A1 10pk for Profile 1.5 RDA

Chill 0.15Ω

PRODUCT INFORMATION
ADDITIONAL
CUSTOM TAB
CUSTOMER REVIEWS
PRODUCT INFORMATION

As the heating core, mesh plays an important role. Each tiny structure change matters. Just like a tailor-made suit that should fit perfectly on you, the mesh for the Profile 1.5 was tried and tested again and again to get the absolute best results. All changes that were implicated were aimed at the same target --- flavor production. To cater to more vapers, three options of mesh coil are included; nexMESH Chill, nexMESH Turbo, and nexMESH Extreme. Please note however that the new mesh options are not interchangeable with the original Profile RDA.

nexMESH Chill A1 0.15Ω

Chill is the strip of vape metal with properly punched holes in it to form a mesh-like structure. It offers even heat distribution and fast heating speed. With precise control on meshing, nexMesh Chill is able to break down the flavor profile in the e-liquid and allow more definite taste sensation.

Performance: smooth and mellow, a more laid-back flavor experience with great flavor production.

nexMESH Turbo A1 0.13Ω

Turbo is the high-density perforated mesh strip similar to nexMesh Chill. It offers a faster ramp up time and provides large contact surface to the e-liquid. The result? More vapor with more possibilities to taste more notes in e-liquids within lesser time.

Performance: bold and clear, a more heightened flavor experience with thick vapor production.

nexMESH Extreme A1 0.16Ω 

Extreme is the refined woven wire mesh derived from the original wire mesh. Its secrets resides in the accurate usage of wires. Flavor production can very drastically with tiny little differences in mesh patterns, including the weaving, the crimping, the spacing, and the wire. To further help understand what power nexMesh Extreme has, we'll use an analogy: nexMesh Extreme is to mesh as complex Clapton is to single-strand coil. In essence, nexMesh Extreme offers larger coiling surface area, in a micro way, than normal mesh strips, thus increases vapor production and enhances flavor production.

Performance: robust and strong, a vigorously warmer flavor experience and heavy vapor production.

Available in packs of 10 pieces each.

ADDITIONAL
HEIGHT: 180 cm - 5' 11”
BUST: 83 cm - 32”
WAIST: 57 cm - 22”
HIPS: 88 cm - 35
SHOE SIZE: 39 - 6

Note: you can configure unique tab per product

CUSTOM TAB

LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt

  • Machine wash
  • Mashine wash, permanent press
  • Machine wash, gentle or delicate
  • Hand wash
  • Do not wash
  • 30°C or 80°F
  • 40°C or 105°
  • 50°C or 120°F
  • 60°C or 140°F
  • 70°C or 160°F
  • 95°C or 200°F
  • 30°C or 80°F
  • 40°C or 105°F
  • 50°C or 120°F
  • 60°C or 140°F
  • 70°C or 160°F
  • 95°C or 200°F
  • Do not wring
  • Bleach if needed
  • Do not Bleach
  • Non-chlorine bleach if needed
  • Non-chlorine bleach if needed
  • Trumble dry
  • Dry normal, low heat
  • Dry normal, mediun heat
  • Dry normal, high heat
  • Dry normal, not heat
  • Hanf to dry
  • Drip dry
  • Dry flat°
  • Dry in the shade
  • Don not dry
  • Don not tumble dry
  • Dry
  • Do not dry Clean
  • Iron any temp, steam
  • Do not iron
  • Maximum 110°C or 230°F
  • Maximum 150°C or 300°F
  • Maximum 200°C or 390°F
  • No steam
  • Dryclean
  • Any solvent
  • Except tetrachlorethylene
  • Petroleum solvent only
  • Wet cleaning

Note: you can configure same tab for all products at your store

CUSTOMER REVIEWS
Wotofo nexMESH A1 10pk for Profile 1.5 RDA

Wotofo nexMESH A1 10pk for Profile 1.5 RDA

$ 9.99