How it works.
First, choose your favorite e-liquid in 0mg. It is best to use an e-liquid where the PG is 70% or less. This will ensure the best results in any non sub ohm/pod style device. It is not recommended to use any nic salt e-liquid in sub ohm devices.
Next, remove the Sapphyre nic salt cap and drip tip. Add your e-liquid directly into the Sapphyre nic salt bottle. Leave a little room at the top to be able to mix the e-liquid with the nicotine. Make sure to secure the drip tip and cap back onto the nic salt bottle before shaking.
Shake vigorously for at least 30 seconds. You will know that your e-liquid has been mixed well when you can see that tiny bubbles have been distributed evenly throughout the bottle. Once you have shaken the sapphyre nic salt bottle, your e-liquid is instantly ready to be vaped.
| HEIGHT: | 180 cm - 5' 11” |
| BUST: | 83 cm - 32” |
| WAIST: | 57 cm - 22” |
| HIPS: | 88 cm - 35 |
| SHOE SIZE: | 39 - 6 |
Note: you can configure unique tab per product
LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt
- Machine wash
- Mashine wash, permanent press
- Machine wash, gentle or delicate
- Hand wash
- Do not wash
- 30°C or 80°F
- 40°C or 105°
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- 30°C or 80°F
- 40°C or 105°F
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- Do not wring
- Bleach if needed
- Do not Bleach
- Non-chlorine bleach if needed
- Non-chlorine bleach if needed
- Trumble dry
- Dry normal, low heat
- Dry normal, mediun heat
- Dry normal, high heat
- Dry normal, not heat
- Hanf to dry
- Drip dry
- Dry flat°
- Dry in the shade
- Don not dry
- Don not tumble dry
- Dry
- Do not dry Clean
- Iron any temp, steam
- Do not iron
- Maximum 110°C or 230°F
- Maximum 150°C or 300°F
- Maximum 200°C or 390°F
- No steam
- Dryclean
- Any solvent
- Except tetrachlorethylene
- Petroleum solvent only
- Wet cleaning
Note: you can configure same tab for all products at your store
