In stock
Out stock

KR1 by Hamilton Devices

SKU: 850012148142

VENDOR: Hamilton

$ 64.99

Hurry! Only 0 Left in Stock!

Real time 13 visitor right now

Pickup currently unavailable at Rainbow City

KR1 by Hamilton Devices

Default Title


The KR1 from Hamilton Devices is the world's first 2-in-1 vape cartridge and concentrate bubbler. This dual-purpose bubbler allows you to interchange between your favorite 510 threaded cartridges and a portable rig. The KR1 is a concentrate lovers dream and is perfect for on-the-go seshing with friends. This battery is engineered specifically for use with CCELL cartridges, but will also work with most 510 threaded cartridges. 

High quality circuit board with multiple protections

PCTG terpene resistant housing and glass bubbler

Press to activate

Screw-in wax coil or screw-in 510 thread, fits either 0.5mL or 1.0mL cartridges

Power: Low - Blue (3.2V); Medium - White (3.6V); High - Red (4.0V)

Battery Capacity: 500mAh

Size: 47.5mm x 23mm x 156.6mm

Rechargeable via Micro USB charger

Color: Brushed Gunmetal

Maintenance Tips: Any device dealing with oils has the potential to leak and general cleaning maintenance will keep the device at its optimal performance.

Recommended Cleaning: 1-2x per battery charge or depending on usage with a Q-Tip and rubbing alcohol.

Recommended Bubbler Cleaning: Clean with an cotton round or Q-Tip in rubbing alcohol or with an alcohol swab. Remove O-ring, cover the holes, and shake with rubbing alcohol. Immediately after, shake with dish soap and water and dry accordingly.

Recommended Plastic Housing Cleaning: Clean with an cotton round or Q-Tip in rubbing alcohol or with an alcohol swab. DO NOT submerge the housing unit in rubbing alcohol. Immediately after, clean with dish soap and water and dry accordingly. DO NOT USE ACETONE OR SOLVENTS FOR CLEANING --- RUBBING ALCOHOL ONLY.

Cartridge is not included.

HEIGHT: 180 cm - 5' 11”
BUST: 83 cm - 32”
WAIST: 57 cm - 22”
HIPS: 88 cm - 35
SHOE SIZE: 39 - 6

Note: you can configure unique tab per product


LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt

  • Machine wash
  • Mashine wash, permanent press
  • Machine wash, gentle or delicate
  • Hand wash
  • Do not wash
  • 30°C or 80°F
  • 40°C or 105°
  • 50°C or 120°F
  • 60°C or 140°F
  • 70°C or 160°F
  • 95°C or 200°F
  • 30°C or 80°F
  • 40°C or 105°F
  • 50°C or 120°F
  • 60°C or 140°F
  • 70°C or 160°F
  • 95°C or 200°F
  • Do not wring
  • Bleach if needed
  • Do not Bleach
  • Non-chlorine bleach if needed
  • Non-chlorine bleach if needed
  • Trumble dry
  • Dry normal, low heat
  • Dry normal, mediun heat
  • Dry normal, high heat
  • Dry normal, not heat
  • Hanf to dry
  • Drip dry
  • Dry flat°
  • Dry in the shade
  • Don not dry
  • Don not tumble dry
  • Dry
  • Do not dry Clean
  • Iron any temp, steam
  • Do not iron
  • Maximum 110°C or 230°F
  • Maximum 150°C or 300°F
  • Maximum 200°C or 390°F
  • No steam
  • Dryclean
  • Any solvent
  • Except tetrachlorethylene
  • Petroleum solvent only
  • Wet cleaning

Note: you can configure same tab for all products at your store

KR1 by Hamilton Devices

KR1 by Hamilton Devices

$ 64.99