These replacement coils for the Crown II tank are dual coils made of stainless steel or Kanthal wrapped in organic cotton. The coils are mounted using a vertical coil design to allow for increased airflow. This stainless steel coils (SUS316) can be used in normal wattage mode or in temperature control mode for devices equipped with stainless steel temperature control chips.
Compatible with: Crown tank II
Available Resistances:
- 0.25Ω SUS316 (60-100W Range)
- 0.5Ω SUS316 (50-80W Range)
- 0.8Ω Kanthal (35-55W Range)
HEIGHT: | 180 cm - 5' 11” |
BUST: | 83 cm - 32” |
WAIST: | 57 cm - 22” |
HIPS: | 88 cm - 35 |
SHOE SIZE: | 39 - 6 |
Note: you can configure unique tab per product
LT01: 70% wool, 15% polyester, 10% polyamide, 5% acrylic 900 Grms/mt
- Machine wash
- Mashine wash, permanent press
- Machine wash, gentle or delicate
- Hand wash
- Do not wash
- 30°C or 80°F
- 40°C or 105°
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- 30°C or 80°F
- 40°C or 105°F
- 50°C or 120°F
- 60°C or 140°F
- 70°C or 160°F
- 95°C or 200°F
- Do not wring
- Bleach if needed
- Do not Bleach
- Non-chlorine bleach if needed
- Non-chlorine bleach if needed
- Trumble dry
- Dry normal, low heat
- Dry normal, mediun heat
- Dry normal, high heat
- Dry normal, not heat
- Hanf to dry
- Drip dry
- Dry flat°
- Dry in the shade
- Don not dry
- Don not tumble dry
- Dry
- Do not dry Clean
- Iron any temp, steam
- Do not iron
- Maximum 110°C or 230°F
- Maximum 150°C or 300°F
- Maximum 200°C or 390°F
- No steam
- Dryclean
- Any solvent
- Except tetrachlorethylene
- Petroleum solvent only
- Wet cleaning
Note: you can configure same tab for all products at your store